EMX-ULTRADTEK - EMX ULTRA D-TEK Plug in Loop
Detector
The Ultra D-TEK was designed to be plug-in compatible with Elite’s
OmniControl™ board operators such as the SL3000 and CSW200. The Ultra
D-TEK is now compatible with the Viking Loop Detector Rack.
The Ultra D-TEK may be used in the Center, Safety and Exit slots on the
operator control board.
Sensitivity selection is simplified by the ULTRAMETER™ display that
indicates the appropriate sensitivity setting to detect the vehicle
positioned on the loop.
The 10 sensitivity settings allow for finer adjustment of the detection
level, while the 4 frequency settings provide greater flexibility in
preventing crosstalk in multi-loop applications.
The Ultra II D-TEK Vehicle Loop Detector delivers the features and benefits found in the EMX ULTRA D-TEK to all operator controls that require a dry contact relay input. The Ultra II D-TEK is also designed to plug into the ULTRA II Motherboard.
Sensitivity selection is simplified by the ULTRAMETER™, which displays the appropriate sensitivity setting to detect the vehicle positioned on the loop.
Ten sensitivity settings enable finer adjustment of the detection level. And the four frequency settings provide greater flexibility in preventing cross talk in multi-loop applications.
The MVP D-TEK® Multi-Voltage Vehicle Detector makes it simple to manage your stock. You only need one detector in your stock room and on your truck. The MVP D-TEK® solves the problem of not knowing which voltage to take for service call or an installation. Reduce the costs of inventory by stocking only one loop detector - with universal voltage.
The D-TEK vehicle loop detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector
The D-TEK vehicle loop detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector
EMX Industries Inc. designed the LP D-TEK for applications in which vehicle detection is needed and low power consumption is desired. The LP D-TEK’s low 9 mA current draw makes it ideal for solar applications, and gate or door operators that require many accessories drawing from the same power supply. The lower current requirement means smaller solar panels are needed, reducing costs.
The D-TEK LM™ is a full fledged plug-in detector that works with many of the Chamberlain operators, like 670, 575, 585 & 595 models. It is a replacement for the Manufacturer original Vehicle Detectors.
The D-TEK LM™ may also be used in any location protected from the weather to detect vehicles for annunciation, triggering cameras, lighting, etc. where 24 Volt AC power is provided. Wiring hookup is simplified using the HAR-7 wiring harness
ELITE-OPENERS.com / Quad Controls, Inc.
2580 Anthem Village Dr.
Henderson, NV 89052
United States
Ph: 800-411-9226
Fax: 888-336-3023
e-mail: info@quadcontrols.com