( 50' LEAD )
The CarSense 202 is based on the well known Carsense 101 design. It has single
piece design, making installation easy. The CarSense 202 is suitable for many
applications, including safety, security access control, and solar applications
( 100' LEAD )
The CarSense 202 is based on the well known Carsense 101 design. It has single
piece design, making installation easy. The CarSense 202 is suitable for many
applications, including safety, security access control, and solar applications
( 150' LEAD )
The CarSense 202 is based on the well known Carsense 101 design. It has single
piece design, making installation easy. The CarSense 202 is suitable for many
applications, including safety, security access control, and solar applications
( 200' LEAD )
The CarSense 202 is based on the well known Carsense 101 design. It has single
piece design, making installation easy. The CarSense 202 is suitable for many
applications, including safety, security access control, and solar applications
( 50' LEAD )
The Carsense 101 motion detector has a buried sensing probe to protect against
vandalism. It is housed in a small, relay-type housing, making it easy to
integrate with security control boards, gate and door operators. The Carsense
101 provides a solution for many vehicle detection challenges. Where safety is
an issue, the Carsense 101 detects moving vehicles in blind areas along a
driving path, and actuates warning lights. Where security is an issue, the
Carsense 101 detects approaching vehicles or an unauthorized movement of a
parked vehicle and actuates alarms, video cameras or annunciator. For access
control applications requiring free exit, the Carsense 101 detects vehicles and
actuates gates, overhead doors and other parking barriers.
The P-NIR6 Diffuse-Reflective Photoeye may be used as a sensor for: vehicle detection in parking spaces, detection input for counting and arming input.
The D-TEK LM™ is a full fledged plug-in detector that works with many of the Chamberlain operators, like 670, 575, 585 & 595 models. It is a replacement for the Manufacturer original Vehicle Detectors.
The D-TEK LM™ may also be used in any location protected from the weather to detect vehicles for annunciation, triggering cameras, lighting, etc. where 24 Volt AC power is provided. Wiring hookup is simplified using the HAR-7 wiring harness
The DTM-9 Seven Day Timer allows you to program your overhead doors, gates, and parking barriers for heavy traffic flow and lock-out times.
The DTM-9 will keep your overhead doors, gates and parking barriers continuously open during rush hours. This will increase comfort and save on entry and exit times for your employees and customers.
The DTM-9 will allow you to program the lock out times for your doors with magnetic locks and electric strikes.
EMX's new magnetic lock for automatic gates.
Features
•Outdoor housing
•Conduit connection
•12V or 24V DC operation
•1200 lb. holding force
•Spring loaded plate for quick release
•Dimension: 7” long x 2 1/2” wide x 1 1/2” high
Designed for explosive environments, the rugged IRB-EXP photocell is used as a safety, reversing, or opening device in conjunction with automatic operators. The IRB-EXP will work with any control board that accepts dry contact on the input. The easy-to-install IRB-EXP is used with garage doors, rolling doors, parking barriers and other equipment located in explosive environments.
The IRB-4X photocell is used as a safety, reversing, or opening device in conjunction with automatic operators. The IRB-4X will work with any control board that accepts dry contact on the input. The easy to install IRB-4X is used with garage doors, rolling doors, parking barriers and other equipment.
The P63 Infrared Modulated Photoeye detects the presence of an obstacle blocking the sensing beam for annunciation, door control and security camera activation
The IRB-325 photocell is an external entrapment protection, device-type B1, non-contact sensor for use with automatic gate operators. The IRB-325 produces a detection signal when the infrared beam is broken.
The Lite Preformed Loop is a ready-to-use loop that works with all EMX loop detectors. This lightweight preformed loop is suitable for saw cut, tar and concrete installations.
EMX Industries Inc. designed the LP D-TEK for applications in which vehicle detection is needed and low power consumption is desired. The LP D-TEK’s low 9 mA current draw makes it ideal for solar applications, and gate or door operators that require many accessories drawing from the same power supply. The lower current requirement means smaller solar panels are needed, reducing costs.
The BP 10 mini infrared eye has 160 foot range along with advanced controls and indicators. It may be used for door sensing, reversing, counting, alarm entry and many other applications acceptable to infrared sensing. The small size of the BP 10 transmitter and receiver lenses make them an ideal choice for
installations where the customer does not want noticeable sensors
The MVP D-TEK® Multi-Voltage Vehicle Detector makes it simple to manage your stock. You only need one detector in your stock room and on your truck. The MVP D-TEK® solves the problem of not knowing which voltage to take for service call or an installation. Reduce the costs of inventory by stocking only one loop detector - with universal voltage.
The NIRPlus™ retro-reflective photoeye can be used as a reversing sensor for commercial overhead doors, gates and parking barriers >>>Extended range for better performance in rain and snow
The P41 Thru Beam Photoelectric Sensor detects the presence of an obstacle if the sensing beam is interrupted. The P41 is used for external mounting.
The P44 Thru Beam Photoelectric Sensor is available with a battery supply.
EMX-ULTRADTEK - EMX ULTRA D-TEK Plug in Loop
Detector
The Ultra D-TEK was designed to be plug-in compatible with Elite’s
OmniControl™ board operators such as the SL3000 and CSW200. The Ultra
D-TEK is now compatible with the Viking Loop Detector Rack.
The Ultra D-TEK may be used in the Center, Safety and Exit slots on the
operator control board.
Sensitivity selection is simplified by the ULTRAMETER™ display that
indicates the appropriate sensitivity setting to detect the vehicle
positioned on the loop.
The 10 sensitivity settings allow for finer adjustment of the detection
level, while the 4 frequency settings provide greater flexibility in
preventing crosstalk in multi-loop applications.
The Ultra II D-TEK Vehicle Loop Detector delivers the features and benefits found in the EMX ULTRA D-TEK to all operator controls that require a dry contact relay input. The Ultra II D-TEK is also designed to plug into the ULTRA II Motherboard.
Sensitivity selection is simplified by the ULTRAMETER™, which displays the appropriate sensitivity setting to detect the vehicle positioned on the loop.
Ten sensitivity settings enable finer adjustment of the detection level. And the four frequency settings provide greater flexibility in preventing cross talk in multi-loop applications.
The D-TEK vehicle loop detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector
The D-TEK vehicle loop detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector
Engineered for ease of use, the VMD AC/DC provides a solution for many vehicle detection challenges. Where safety is an issue, the VMD detects moving vehicles in an industrial environment where there are blind areas along the driving path and actuates warning lights.
Where security is an issue, the VMD detects approaching vehicles or an unauthorized movement of a parked vehicle and actuates alarms, video cameras or annunciator.
For access control applications requiring free exit, the VMD detects vehicles for gates, overhead doors and parking barriers.
ELITE-OPENERS.com / Quad Controls, Inc.
2580 Anthem Village Dr.
Henderson, NV 89052
United States
Ph: 800-411-9226
Fax: 888-336-3023
e-mail: info@quadcontrols.com